Platform Explorer / Nuxeo Platform 2023.20

Extension point command

Documentation

Extension point to contribute new commands.

Available options are: - name: string attribute used as the command identifier.

- enabled: boolean attribute, command is unavailable if false.

- commandLine: the command to execute.

- parameterString: the parameters to pass to the command. Parameters like #{parameter} represents a file. So you can use either a path to a file or a blob. Parameters like %parameters are literals.

- winParameterString: Same as above but used in windows environments. For instance you have to use double quotes in windows instead of simple quote.

- winCommand: command to execute specifically for windows. Use commandLine is WinCommand is null;

@since 8.4 - testParameterString: the parameters to pass to the CommandTester. The CommandTester will run the command with these params

@since 8.4 - winTestParameterString: same as above but used in windows environments.

- tester: name of the CommandTester. The CommandTester defined in commandTester extension point. Default is DefaultCommandTester, which looks if the command is available.

- readOutput: Boolean, default is true. If false, command output is never read.

- installationDirective: a String that is returned instead of the usual output when the command isn't available.

CommandLine contribution example:

    <command enabled="true" name="myCommand">
        <commandLine>commandName</commandLine>
        <parameterString> -any -parameters '%specific' %parameters #{blobOrPath}</parameterString>
        <winParameterString> -any -parameters "%specific" %parameters " #{blobOrPath}</winParameterString>
        <testParameterString> -any -parameters</testParameterString>
        <winTestParameterString> -any -specific -windows -parameters</winTestParameterString>
        <installationDirective>You need to install commandName.</installationDirective>
    </command>

Contribution Descriptors

  • Class: org.nuxeo.ecm.platform.commandline.executor.service.CommandLineDescriptor

Existing Contributions

Contributions are presented in the same order as the registration order on this extension point. This order is displayed before the contribution name, in brackets.

  • nuxeo-platform-commandline-executor-2023.20.15.jar /OSGI-INF/commandline-default-contrib.xml
    <extension point="command" target="org.nuxeo.ecm.platform.commandline.executor.service.CommandLineExecutorComponent">
        <!-- timeout is used to set a time limit when running command, this definition checks if timeout is available -->
        <command enabled="true" name="timeout">
          <commandLine>timeout</commandLine>
          <parameterString>--version</parameterString>
        </command>
      </extension>
  • nuxeo-platform-3d-2023.20.15.jar /OSGI-INF/commandline-contrib.xml
    <extension point="command" target="org.nuxeo.ecm.platform.commandline.executor.service.CommandLineExecutorComponent">
    
        <command enabled="true" name="blender_pipeline">
          <commandLine>docker</commandLine>
          <testParameterString>pull nuxeo/blender</testParameterString>
          <parameterString>run --name #{name} --volumes-from #{data} nuxeo/blender
            -P /scripts/#{scriptFile} -- --input /in/#{inFile} --outdir /out --operators #{operators}
            --renderids #{renderIds} -li #{lodIds} -pp #{percPoly} -mp #{maxPoly} -d #{dimensions} -c #{coords}
          </parameterString>
          <installationDirective>Please, install docker (https://www.docker.com/)
          </installationDirective>
        </command>
        <command enabled="true" name="collada2gltlf">
          <commandLine>docker</commandLine>
          <testParameterString>pull nuxeo/collada2gltf</testParameterString>
          <parameterString>run --name #{name} --volumes-from #{data} nuxeo/collada2gltf
            -f /in/#{inFile} -o /out/#{outFile} -e</parameterString>
          <installationDirective>Please, install docker (https://www.docker.com/)
          </installationDirective>
        </command>
        <command enabled="true" name="create_container">
          <commandLine>docker</commandLine>
          <testParameterString>version</testParameterString>
          <parameterString>create --name #{name} #{image} </parameterString>
          <installationDirective>Please, install docker (https://www.docker.com/)
          </installationDirective>
        </command>
        <command enabled="true" name="remove_container">
          <commandLine>docker</commandLine>
          <testParameterString>version</testParameterString>
          <parameterString>rm #{name} </parameterString>
          <installationDirective>Please, install docker (https://www.docker.com/)
          </installationDirective>
        </command>
        <command enabled="true" name="copy_container">
          <commandLine>docker</commandLine>
          <testParameterString>version</testParameterString>
          <parameterString>cp #{source} #{destination}</parameterString>
          <installationDirective>Please, install docker (https://www.docker.com/)
          </installationDirective>
        </command>
        <command enabled="true" name="useruid">
          <commandLine>id</commandLine>
          <testParameterString>-u</testParameterString>
          <parameterString>-u #{username}</parameterString>
          <installationDirective>Please, install id command</installationDirective>
        </command>
      </extension>
  • nuxeo-core-convert-plugins-2023.20.15.jar /OSGI-INF/commandline-pdf2text-contrib.xml
    <extension point="command" target="org.nuxeo.ecm.platform.commandline.executor.service.CommandLineExecutorComponent">
    
        <command enabled="true" name="pdftotext">
          <commandLine>pdftotext</commandLine>
          <parameterString>-enc UTF-8 #{sourceFilePath} #{targetFilePath}</parameterString>
          <winParameterString>-enc UTF-8 #{sourceFilePath} #{targetFilePath}</winParameterString>
          <installationDirective>You need to install pdftotext.</installationDirective>
        </command>
    
        <command enabled="true" name="ps2pdf">
          <commandLine>gs</commandLine>
          <winCommand>gswin64c</winCommand>
          <parameterString>-dNOPAUSE -dBATCH -sDEVICE=pdfwrite -dEPSCrop -sOutputFile=#{targetFilePath}
            #{sourceFilePath}</parameterString>
          <testParameterString>-dNODISPLAY</testParameterString>
          <installationDirective>You need to install GhostScript.</installationDirective>
        </command>
    
      </extension>
  • nuxeo-binary-metadata-2023.20.15.jar /OSGI-INF/binary-metadata-default-contrib.xml
    <extension point="command" target="org.nuxeo.ecm.platform.commandline.executor.service.CommandLineExecutorComponent">
    
        <command enabled="true" name="exiftool-read-taglist">
          <commandLine>exiftool</commandLine>
          <parameterString>-m -q -q -G -json #{tagList} #{inFilePath}</parameterString>
          <installationDirective>You need to install exiftool</installationDirective>
        </command>
    
        <command enabled="true" name="exiftool-read">
          <commandLine>exiftool</commandLine>
          <parameterString>-m -q -q -G -json #{inFilePath}</parameterString>
          <installationDirective>You need to install exiftool</installationDirective>
        </command>
    
        <command enabled="true" name="exiftool-write">
          <commandLine>exiftool</commandLine>
          <parameterString>-m -q -q -G -overwrite_original #{tagList} #{inFilePath}</parameterString>
          <installationDirective>You need to install exiftool</installationDirective>
        </command>
    
        <!-- Since 7.3 -->
        <command enabled="true" name="exiftool-read-taglist-noprefix">
          <commandLine>exiftool</commandLine>
          <parameterString>-m -q -q -json #{tagList} #{inFilePath}</parameterString>
          <installationDirective>You need to install exiftool</installationDirective>
        </command>
    
        <!-- Since 7.3 -->
        <command enabled="true" name="exiftool-read-noprefix">
          <commandLine>exiftool</commandLine>
          <parameterString>-m -q -q -json #{inFilePath}</parameterString>
          <installationDirective>You need to install exiftool</installationDirective>
        </command>
    
        <!-- Since 7.3 -->
        <command enabled="true" name="exiftool-write-noprefix">
          <commandLine>exiftool</commandLine>
          <parameterString>-m -q -q -overwrite_original #{tagList} #{inFilePath}</parameterString>
          <installationDirective>You need to install exiftool</installationDirective>
        </command>
    
      </extension>
  • nuxeo-platform-convert-2023.20.15.jar /OSGI-INF/commandline-imagemagick-convert-contrib.xml
    <extension point="command" target="org.nuxeo.ecm.platform.commandline.executor.service.CommandLineExecutorComponent">
    
        <command enabled="true" name="converter">
          <commandLine>convert</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet #{inputFilePath}[0] #{outputFilePath}</parameterString>
          <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet #{inputFilePath}[0] #{outputFilePath}</winParameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
    
      </extension>
  • nuxeo-platform-convert-2023.20.15.jar /OSGI-INF/commandline-pdf2html-contrib.xml
    <extension point="command" target="org.nuxeo.ecm.platform.commandline.executor.service.CommandLineExecutorComponent">
    
        <command enabled="true" name="pdftohtml">
          <commandLine>pdftohtml</commandLine>
          <parameterString> -c -nodrm -enc UTF-8 -noframes #{inFilePath} #{outDirPath}/index.html</parameterString>
          <winParameterString> -c -nodrm -enc UTF-8 -noframes #{inFilePath} #{outDirPath}\index.html</winParameterString>
          <installationDirective>You need to install pdftohtml</installationDirective>
        </command>
    
      </extension>
  • nuxeo-platform-convert-2023.20.15.jar /OSGI-INF/commandline-wpd2text-contrib.xml
    <extension point="command" target="org.nuxeo.ecm.platform.commandline.executor.service.CommandLineExecutorComponent">
        <command enabled="true" name="wpd2text">
          <commandLine>wpd2text</commandLine>
          <parameterString> #{inFilePath}</parameterString>
          <installationDirective>You need to install wpd2text (deb: libwpd-tools)  http://libwpd.sourceforge.net/download.html</installationDirective>
        </command>
    
      </extension>
  • nuxeo-platform-convert-2023.20.15.jar /OSGI-INF/commandline-soffice-contrib.xml
    <extension point="command" target="org.nuxeo.ecm.platform.commandline.executor.service.CommandLineExecutorComponent">
        <command enabled="true" name="soffice">
          <commandLine>soffice</commandLine>
          <winCommand>soffice.exe</winCommand>
          <parameterString>--headless --norestore --writer --convert-to #{format} #{sourceFilePath} --outdir #{outDirPath} -env:UserInstallation=#{userInstallation}</parameterString>
          <testParameterString>--version</testParameterString>
          <winTestParameterString>--headless --cat test</winTestParameterString>
          <installationDirective>You need to install LibreOffice and add soffice to the PATH environment variable.
          </installationDirective>
        </command>
      </extension>
  • nuxeo-platform-imaging-core-2023.20.15.jar /OSGI-INF/commandline-imagemagick-contrib.xml
    <extension point="command" target="org.nuxeo.ecm.platform.commandline.executor.service.CommandLineExecutorComponent">
    
        <command enabled="true" name="identify">
          <commandLine>identify</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -ping -format '%m %w %h %z %[colorspace]' #{inputFilePath}[0]</parameterString>
          <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -ping -format "%m %w %h %z %[colorspace]" #{inputFilePath}[0]</winParameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
    
        <command enabled="true" name="crop">
          <commandLine>stream</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -map rgb -storage-type char -extract #{tileWidth}x#{tileHeight}+#{offsetX}+#{offsetY} #{inputFilePath}[0] - | convert -depth 8 -size #{tileWidth}x#{tileHeight} rgb:- #{outputFilePath}</parameterString>
          <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -map rgb -storage-type char -extract #{tileWidth}x#{tileHeight}+#{offsetX}+#{offsetY} #{inputFilePath}[0] - | convert -depth 8 -size #{tileWidth}x#{tileHeight} rgb:- #{outputFilePath}</winParameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
    
        <command enabled="true" name="resizer">
          <commandLine>convert</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -depth #{targetDepth} #{inputFilePath}[0] jpg:- | convert - -resize #{targetWidth}x#{targetHeight} #{outputFilePath}</parameterString>
          <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -depth #{targetDepth} #{inputFilePath}[0] -resize #{targetWidth}x#{targetHeight} #{outputFilePath}</winParameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
    
        <command enabled="true" name="gifResizer">
          <commandLine>convert</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -depth #{targetDept h} #{inputFilePath}[0] -coalesce -resize #{targetWidth}x#{targetHeight} -deconstruct #{outputFilePath}</parameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
    
        <command enabled="true" name="jpegResizer">
          <commandLine>convert</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -background white -flatten -depth #{targetDepth} #{inputFilePath}[0] jpg:- | convert - -resize #{targetWidth}x#{targetHeight} #{outputFilePath}</parameterString>
          <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -background white -flatten -depth #{targetDepth} #{inputFilePath}[0] -resize #{targetWidth}x#{targetHeight} #{outputFilePath}</winParameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
    
        <command enabled="true" name="rotate">
          <commandLine>convert</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet #{inputFilePath}[0] -rotate #{angle} #{outputFilePath}</parameterString>
          <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet #{inputFilePath}[0] -rotate #{angle} #{outputFilePath}</winParameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
    
        <command enabled="true" name="cropAndResize">
          <commandLine>stream</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -map #{mapComponents} -storage-type char -extract #{tileWidth}x#{tileHeight}+#{offsetX}+#{offsetY} #{inputFilePath}[0] - | convert -depth 8 -size #{tileWidth}x#{tileHeight} -resize #{targetWidth}x#{targetHeight}! #{mapComponents}:- #{outputFilePath}</parameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
    
        <command enabled="true" name="multiTiler">
          <commandLine>convert</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet #{inputFilePath}[0] -crop #{tileWidth}x#{tileHeight} +repage #{outputFilePath}</parameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
    
      </extension>
  • nuxeo-platform-video-2023.20.15.jar /OSGI-INF/commandline-contrib.xml
    <extension point="command" target="org.nuxeo.ecm.platform.commandline.executor.service.CommandLineExecutorComponent">
    
        <command enabled="true" name="ffmpeg-info">
          <commandLine>ffprobe</commandLine>
          <parameterString> #{inFilePath}</parameterString>
          <installationDirective>You need to install ffmpeg from http://ffmpeg.org (apt-get install ffmpeg)
          </installationDirective>
        </command>
    
        <command enabled="true" name="ffmpeg-screenshot">
          <commandLine>ffmpeg</commandLine>
          <!-- It's important to put the -ss option before the -i option for
            faster (though less accurate) seek / skip to position in the input file -->
          <parameterString> -y -ss #{position} -i #{inFilePath} -frames:v 1 -f image2 #{outFilePath}</parameterString>
          <installationDirective>You need to install ffmpeg from http://ffmpeg.org (apt-get install ffmpeg)
          </installationDirective>
        </command>
    
        <command enabled="true" name="ffmpeg-screenshot-resize">
          <commandLine>ffmpeg</commandLine>
          <!-- It's important to put the -ss option before the -i option for faster
            (though less accurate) seek / skip to position in the input file.
    
            The -frames:v 1 option tell to take only one screenshot. -->
          <parameterString> -y -ss #{position} -i #{inFilePath} -frames:v 1 -f image2 -vf scale=#{width}:#{height} #{outFilePath}</parameterString>
          <installationDirective>You need to install ffmpeg from http://ffmpeg.org (apt-get install ffmpeg)
          </installationDirective>
        </command>
    
        <command enabled="true" name="ffmpeg-towebm">
          <commandLine>ffmpeg</commandLine>
          <parameterString> -i #{inFilePath} -s #{width}x#{height} -acodec libvorbis -v 0 #{outFilePath}</parameterString>
          <installationDirective>You need to install ffmpeg from http://ffmpeg.org (apt-get install ffmpeg)
          </installationDirective>
        </command>
    
        <command enabled="true" name="ffmpeg-tomp4">
          <commandLine>ffmpeg</commandLine>
          <parameterString> -i #{inFilePath} -s #{width}x#{height} -acodec aac -strict -2 -pix_fmt yuv420p -vcodec libx264 -v 0 #{outFilePath}</parameterString>
          <winParameterString> -i #{inFilePath} -s #{width}x#{height} -pix_fmt yuv420p -vcodec libx264 -v 0 #{outFilePath}</winParameterString>
          <installationDirective>You need to install ffmpeg from http://ffmpeg.org (apt-get install ffmpeg)
          </installationDirective>
        </command>
    
        <command enabled="true" name="ffmpeg-toogg">
          <commandLine>ffmpeg</commandLine>
          <parameterString> -i #{inFilePath} -s #{width}x#{height} -acodec libvorbis -v 0 #{outFilePath}</parameterString>
          <installationDirective>You need to install ffmpeg from http://ffmpeg.org (apt-get install ffmpeg)
          </installationDirective>
        </command>
    
        <command enabled="true" name="ffmpeg-toavi">
          <commandLine>ffmpeg</commandLine>
          <parameterString> -i #{inFilePath} -s #{width}x#{height} -q:v 0 -c:v mpeg4 -c:a ac3 #{outFilePath}</parameterString>
          <installationDirective>You need to install ffmpeg.
          </installationDirective>
        </command>
    
      </extension>
  • nuxeo-platform-video-2023.20.15.jar /OSGI-INF/video-tools-commandlines-contrib.xml
    <extension point="command" target="org.nuxeo.ecm.platform.commandline.executor.service.CommandLineExecutorComponent">
    
        <command enabled="true" name="videoClosedCaptionsExtractor">
          <commandLine>ccextractor</commandLine>
          <parameterString>#{sourceFilePath} -out=#{outFormat} -trim -o #{outFilePath}
          </parameterString>
          <installationDirective>You need to install ccextractor.</installationDirective>
        </command>
    
        <command enabled="true" name="videoPartClosedCaptionsExtractor">
          <commandLine>ccextractor</commandLine>
          <parameterString>#{sourceFilePath} -out=#{outFormat} -startat #{startAt} -endat #{endAt} -trim -o #{outFilePath}
          </parameterString>
          <installationDirective>You need to install ccextractor.</installationDirective>
        </command>
    
        <command enabled="true" name="videoConcat">
          <commandLine>ffmpeg</commandLine>
          <parameterString>-y -f concat -safe 0 -i #{listFilePath} -c copy #{outFilePath}</parameterString>
          <installationDirective>You need to install ffmpeg.</installationDirective>
        </command>
    
        <!-- This one is very fast, but you may miss frames. Use it when you are sure you'll get the correct cut -->
        <command enabled="true" name="videoSlicerByCopy">
          <commandLine>ffmpeg</commandLine>
          <parameterString>-y -i #{sourceFilePath} -ss #{startAt} -t #{duration} -c copy #{outFilePath}</parameterString>
          <installationDirective>You need to install ffmpeg.</installationDirective>
        </command>
    
        <!-- This on is the basic slicing. It re-encodes the video, so it it is slower than videoSlicerCopy -->
        <command enabled="true" name="videoSlicer">
          <commandLine>ffmpeg</commandLine>
          <parameterString>-y -i #{sourceFilePath} -ss #{startAt} -t #{duration} #{outFilePath}</parameterString>
          <installationDirective>You need to install ffmpeg.</installationDirective>
        </command>
    
        <!-- This enables video slicing starting from the specific time -->
        <command enabled="true" name="videoSlicerStartAt">
          <commandLine>ffmpeg</commandLine>
          <parameterString>-y -i #{sourceFilePath} -ss #{startAt} #{outFilePath}</parameterString>
          <installationDirective>You need to install ffmpeg.</installationDirective>
        </command>
    
        <!-- Slices in n segment of #duration each. outFilePath is an expression
             (OUT%03d.mp4 for example) so ffmpeg creates one file/segment -->
        <command enabled="true" name="videoSlicerSegments">
          <commandLine>ffmpeg</commandLine>
          <parameterString>-y -i #{sourceFilePath} -map 0 -c copy -f segment -segment_time #{duration} -reset_timestamps 1
            #{outFilePath}
          </parameterString>
          <installationDirective>You need to install ffmpeg.</installationDirective>
        </command>
    
        <!-- filterComplex is the full filter. For example: "overlay=10:10" -->
        <command enabled="true" name="videoWatermarkWithPicture">
          <commandLine>ffmpeg</commandLine>
          <parameterString>-y -i #{sourceFilePath} -i #{pictureFilePath} -filter_complex #{filterComplex} #{outFilePath}
          </parameterString>
          <installationDirective>You need to install ffmpeg.</installationDirective>
        </command>
    
      </extension>
  • nuxeo-thumbnail-2023.20.15.jar /OSGI-INF/thumbnail-commandline-imagemagick-contrib.xml
    <extension point="command" target="org.nuxeo.ecm.platform.commandline.executor.service.CommandLineExecutorComponent">
    
        <command enabled="true" name="toThumbnail">
          <commandLine>convert</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -strip -thumbnail #{size} -background transparent -gravity center -format png -quality 75 #{inputFilePath}[0] #{outputFilePath}</parameterString>
          <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -strip -thumbnail #{size} -background transparent -gravity center -format png -quality 75 #{inputFilePath}[0] #{outputFilePath}</winParameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
    
      </extension>
  • nuxeo-user-profile-2023.20.15.jar /OSGI-INF/commandline-contrib.xml
    <extension point="command" target="org.nuxeo.ecm.platform.commandline.executor.service.CommandLineExecutorComponent">
    
        <command enabled="true" name="resizeAvatar">
          <commandLine>convert</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet #{sourceFilePath}[0] jpg:- | convert - -resize #{targetWidth}x#{targetHeight}&gt; #{targetFilePath}</parameterString>
          <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet #{sourceFilePath}[0] -resize #{targetWidth}x#{targetHeight}&gt; #{targetFilePath}</winParameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
    
      </extension>